Commercial Gas Safety Checks
The Gas Safety (Installation and Use) (Amendment) Regulations 2018 - GSIUR - came into force on 6 April 2018, regulating the installation, maintenance and use of gas systems in both domestic and commercial premises. The fifth edition of the GSIUR’s Approved Code of Practice gives practical advice to any person who may have a duty under the regulations, including those who install, service, maintain or repair gas appliances and other gas fittings. Landlords and those who provide gas appliances within premises for use also have duties under these regulations.
Fully accredited
You can trust our accreditations from NICEIC, UKAS, BIFM, CHAS & more
Call us for an instant quote
Get to grips with our competitive services with a free, no obligation quote
Nationwide service
Our fantastic help is available no matter where you are in the UK
Save up to 30%
See how much you could save with our competitive prices. National service local price.
Annual commercial gas appliance checks ensure that gas burns correctly; that the appliance is suitable for the environment in which it is located; that the appliance is stable, securely fitted and properly connected to supply; that adequate and permanent ventilation is installed; that flues and chimneys are operating correctly; and that all safety devices are properly functioning.
Upon completion of your statutory testing or completion of installation, you will receive Gas Safe Certification applicable to your appliance/system to ensure that you have accurate records of testing in line with GSIUR. Any remedial issues are notified to our dedicated Mechanical Quotations department, staffed by qualified, experienced gas industry specialists who can offer a bespoke solution to satisfy your statutory responsibilities.
Competence is a combination of practical skill, training, knowledge, experience and safe working practices to carry out the job in hand safely, and ensuring the installation/appliance is left in a safe condition for use.
At phs Compliance our Gas Engineers and Gas Managers are fully competent, accredited to IGEM and Gas Safe Register, and up to date with regulatory and industry best practice.
All fuel types and appliance categories are covered under our accreditation to Gas Safe Register and Oftec so you can rely upon highly competent service capability.
Portable Appliance Testing (PAT) phs Compliance is the UK’s most experienced and largest provider of Portable Appliance Testing (PAT), with a history dating back to 1991 and today conducting over
EICR Inspections and Certification All workplaces in the UK must have an Electrical Installation Condition Report (EICR) conducted on a regular basis. Failure to provide a safe workplace under the
Regular testing and inspection of your building's electrical circuits is essential to ensure compliance with your statutory obligations under The Electricity at Work Regulations (1989) Act and many
phs Compliance is one of the UK’s leading fully accredited specialists in the testing, servicing and maintenance of fire alarm systems, with nationwide coverage and 160 expert engineers ensuring
Ensuring that all fire extinguishers are fully functioning and well maintained throughout your building is an intrinsic part of the fire safety duty of care of all building operators and employers.
It is the responsibility of all employers and building owners to have a regularly updated fire risk assessment conducted to ascertain if the correct fire safety measures are in place and identify
Regular inspection and testing of emergency escape lighting is a statutory obligation of building owners and employers under the Regulatory Reform (Fire Safety) Order 2005 as well as a range of
Commercial Gas Safety Checks The Gas Safety (Installation and Use) (Amendment) Regulations 2018 - GSIUR - came into force on 6 April 2018, regulating the installation, maintenance and use of gas
Leak testing is required by law for air conditioning systems and components in workplaces, since fluorinated gases can be contained within refrigerant gas used for chilling and cooling.The European
Our client, one of the UK’s ‘Big Four’ grocery retailers, needed technical expertise to better understand its building assets and facilities operations with specific reference to its superstores
Through our Tier 1 facilities management client, phs Compliance self-delivered comprehensive project services for replacement emergency lighting across a large fully operational RAF base. As a high
Through our Tier 1 facilities management customer, we delivered mechanical installation and project works to one of their clients, the worlds’ largest provider of flexible workspace solutions with
Engaged by a Tier 1 FM provider, phs Compliance supported the train operator client with a major electrical remedial project. The requirement was to attend and rectify remedial works across 262 rail